Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-11019-D125X22-G150
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Datasheets(X)
Diameter (Ø) | 125 mm |
Bore diameter | 22 mm |
Grid size | 150 |
Max. rotation speed | 12200 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Colour of disc | 0 - not applicable |
Adhesive base | Synthetic resin |
Last viewed
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Screw with flattened half round head with hexagon socket, imperial
ABS attachment point Lock X steel
Knurled screw, low profile
Drawer divider set BASIC, 18-compartment
Thread sealant paste
Nitrile chemical protective glove With cotton velour finish inside
Cupboard rail, round With seamless brass coating
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Thread-rolling screw