Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-11061-D180X22-G40
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Datasheets(X)
Diameter (Ø) | 180 mm |
Bore diameter | 22 mm |
Grid size | 40 |
Max. rotation speed | 8500 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Colour of disc | 0 - not applicable |
Adhesive base | Synthetic resin |
Last viewed
Slotted flat-head screw ISO 1580, A4 stainless steel, plain
VARIFIX® bracket set, heavy-duty design For refrigerators/air-conditioning units
Catch bolt With bail plate
Slotted countersunk head screw DIN 963, 4.8 steel, plain
Safety boots, S3
Drilling screw, hexagon head with protective cap and sealing washer made of A2 stainless steel pias®
Sweatshirt
Heavy-duty clamping pin
Shim ring DIN 988, steel, plain
Carrier rods without markers for SNAP marker