Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-11072-D180X22-G320
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Diameter (Ø) | 180 mm |
Bore diameter | 22 mm |
Grid size | 320 |
Max. rotation speed | 8500 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Adhesive base | Synthetic resin |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Deep groove ball bearing FAG
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Roll-in sliding block with guide bar
Carbide burr multi-performance TiAlSiN
BASIC 8.8 system workshop trolley
Hose clamp with asymmetrical lock
Identification rings, M-65 standard
Hexagonal bolt with half dog point and small hexagon
TiN 90° countersink DIN 335C
