Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-351149-XLOCK-D115-G40
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Datasheets(X)
Diameter (Ø) | 115 mm |
Bore diameter | 22 mm |
Grid size | 40 |
Max. rotation speed | 13300 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Colour of disc | 0 - not applicable |
Adhesive base | Synthetic resin |
Last viewed
4KS profile double cylinder for keyed alike systems with original equipment
Hoodie Z266
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
E90 fire protection duct end cap
Stripping tool AM 130 PLUS
Threaded fitting
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Akura 44 profile double cylinder for keyed alike systems with original equipment
Cutting disc, Longlife & Speed For steel and stainless steel
Spacer stud, polyamide, hex, F/M