Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-66459-D180X22-G36
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Datasheets(X)
Diameter (Ø) | 180 mm |
Bore diameter | 22 mm |
Grid size | 36 |
Max. rotation speed | 8500 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Colour of disc | 0 - not applicable |
Adhesive base | Synthetic resin |
Last viewed
Feather key, high profile
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Charger clamp Fully insulated, 1,000 A
Hexagon head bolt With thin shaft in hygienic design
Seal puller tool With 2 pull-out sizes
PinPuller® power pull ring
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
Hammer drill bit Plus Quadro-S
E 6.3 PZ bit (1/4 inch)