Vulcanised fibre disc Klingspor CS 561
Vulcanised fibre disc Klingspor CS 561
FBRDISC-KLINGSPOR-70449-D180X22-G60
Register now and access more than 125,000 products
CS 561 fibre discs for steel and non-ferrous metal have very good removal rates. The synthetic resin bond makes this product robust, resistant and durable. CS 561 fibre discs have a flexible base made of vulcanised fibre. The dense scattering of corundum abrasive grain makes them extremely powerful.
CS 561 fibre discs are used on angle grinders. The range of available grit sizes makes the CS 561 sanding disc very versatile. In the medium and fine grit sizes, there is a high removal rate on steel and non-ferrous metal. In the coarser grit sizes, the CS 561 can even be used on wood or plastic. The solid construction enables working at very high speeds.
Datasheets(X)
Diameter (Ø) | 180 mm |
Bore diameter | 22 mm |
Grid size | 60 |
Max. rotation speed | 8500 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Colour of disc | 0 - not applicable |
Adhesive base | Synthetic resin |
Last viewed
Glazing packer
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Paint spray, silk gloss
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, plain
Single guide rail for Redoslide
Hexagonal bolt with thread up to the head
Position screw for ISO D clamping system
Safety boots, S2
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)