Vulcanised fibre disc Klingspor FS 764 ACT
Vulcanised fibre disc Klingspor FS 764 ACT
FBRDISC-KLINGSPOR-316478-125X22-G40
Register now and access more than 125,000 products
The FS 764 ACT from Klingspor is a fibre disc for use on steel and stainless steel. The fibre disc enables sanding work with a high removal rate. The abrasive is corundum. The binding from the special Klingspor ACT formulation produces a high level of grain adhesion, which together with the vulcanised fibre backing results in an extremely resistant abrasive.
The advantages are:
- Above-average service life
- Minimal clogging
- High removal rate
- Uniform grinding finish
Datasheets(X)
Diameter (Ø) | 125 mm |
Bore diameter | 22 mm |
Grid size | 40 |
Max. rotation speed | 12200 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Corundum |
Adhesive base | Synthetic resin |
Last viewed
Stop angle Accuracy 1
4KS profile thumbturn cylinder
Hexagonal bolt with shank DIN 931, A4-70 stainless steel, plain
Cut protection glove Mapa KryTech 642
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Screw tap, manual, second tap Ruko hand tap HSS DIN 352 Whitworth BSW second tap
Face wrench
Feed shaft with nut Universal, 3 pieces
Circlip squeezing pliers For drive shafts
Full face mask