W-EAP 1 single anchor point
Single anchor point W-EAP 1
ANCPT-W-EAP 1- 300MM
Art.-no. 0838911301
EAN 4052712226298
Register now and access more than 125,000 products
- 360° rotating anchor eyelet
- The integrated fall indicator on the anchor point indicates a fall
- Available as versions with 300, 400 or 500 mm rod lengths
- Reduced force transfer to the structure through defined plastic deformation in the event of a fall
- Resistant to corrosion and weathering: The single anchor point is made from stainless steel (minimum grade A2)
- The Würth Fixanchor W-FAZ/A4 M12 x 15/110 fastening material is included in the scope of delivery
- The W-EAP 1 is anchored in concrete using the Würth screw anchor W-SA A4 12 x 100/10 or Würth Fixanchor W-FAZ/A4 M12 x 15/110
- Observe the installation instructions and approvals for the fastening material and single anchor point!
- With general technical approval Z-14.9-692
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in conjunction with personal fall protection systems (PFPS)
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The anchor point may be used in reinforced or non-reinforced normal weight concrete of a concrete compressive strength of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12 using the specified fixing elements only
Material | Stainless steel A2, 1.4301 |
Rod length | 300 mm |
Diameter | 20 mm |
Height | 300 mm |
Surface | Stainless steel FINISH |
Last viewed
Paint spray, high gloss
Hexagon socket screw-in nut with collar DIN 908, brass, plain
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, A2 stainless steel, plain, with full thread
Safety boots, S1 Steitz VD PRO 1710
Clevis load hook with forged latch, QC 10
Low-cut safety shoes, S3 Steitz VD 3500 SST SF
Protective glove, nitrile Nitras 03400
Countersunk head screw, recessed head Z DIN 965, zinc plated 4.8 steel with thick-layer passivation (VZD), PZ drive
Multi Performance carbide annular cutter