W-EAP 3 single anchor point
Single anchoring point W-EAP 3
ANCPT-W-EAP 3- 500MM
Register now and access more than 125,000 products
- 360° rotating anchor eye
- The integrated fall indicator on the anchor point indicates a fall
- Available as versions with 300, 400 or 500-mm rod lengths
- Reduced force transmission to the structure through defined plastic deformation in the event of a fall
- Resistant to corrosion and weathering: The single anchor point is made from stainless steel (at least A2)
- No need to drill (through) aerated concrete element and/or counter-lock the single anchor point for installation
- Direct installation in aerated concrete
- The single anchor point may be installed using the specified fixing elements only
- Fastening material PBD M10 x 10-E A4 is included in the scope of delivery
- The W-EAP 3 needs to be anchored on aerated concrete with the PBD M10 x 10-E A4 aerated concrete anchor (special setting tool required)
- Observe the installation instructions and approvals for the fasteners and single anchor point.
- Anchor point is part of the mounting kit
- With general construction permit Z-14.9-692
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity)
- Suitable for securing up to a maximum of 1 person in conjunction with personal protective equipment against falling
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
Material | Stainless steel |
Rod length | 500 mm |
Diameter | 20 mm |
EN standard | 795 |
Type description | W-EAP 3 |
Surface | Plain |
Datasheets(X)
Last viewed
Locking system DUAL
Wood screw Hexagon head DIN 571, A4 stainless steel
W-EAP 1 single anchor point
Abrasive flapwheel Klingspor SM 611
Hexagonal bolt with shank
Safety shoe S1
Expander tool for drop-in anchors, without visual installation control
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Countersunk tapping screw type C with H recessed head ISO 7050, shape C, zinc-plated, blue passivated (A2K), with H cross recess
Hexagon Socket Head Cap Screw ISO 4762, brass, plain
