W-FAZ/S Fixanchor with large washer DIN EN ISO 7093-1 (DIN 9021) - ANC-(W-FAZ/S)-WSH-(A2K)-10-30-M10X90

W-FAZ/S Fixanchor with large washer DIN EN ISO 7093-1 (DIN 9021)

Name: W-FAZ/S Fixanchor with large washer DIN EN ISO 7093-1 (DIN 9021)
Brand: Würth
SKU: 5928310010

Fixanchor W-FAZ w/ large washer steel zinc plated
ANC-(W-FAZ/S)-WSH-(A2K)-10-30-M10X90

Art.-no. 5928310010

EAN 4046777112108

All versions

Similar products

Prices for customers after login

W-FAZ/S Fixanchor with large washer DIN EN ISO 7093-1 (DIN 9021)

Art.-no. 5928310010

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated

High loads, small spacing and edge distance

Immediate load-bearing capacity, no waiting times

Time-saving in-place installation

Reduced effective anchorage depth

Minimised drilling, time-saving

Versatile applications

Proof of Performance

Approval ETA-99/0011 for individual fixing point, option 1, cracked and uncracked concrete, seismic performance category C1 and C2 (M8–M16)

Fire resistance (M8–M16): F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature-time curve)

Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-99/0011)

Application area

Create the drill hole

Knock in anchor with mason's mallet or machine setting tool

Set anchor in place

Apply torque

Approval ETA-99/0011 for individual fixing point, option 1, cracked and uncracked concrete, seismic performance category C1 and C2 (M8–M16)

Fire resistance (M8–M16): F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature-time curve)

Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-99/0011)

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Individual fixing point with approval

Standard concrete C20/25 to C50/60 (cracked and uncracked concrete, seismic performance category C1 and C2)

For the attachment of e.g. metal structures, metal profiles, brackets, base plates, supports, cable conduits, pipes, railings, wooden structures, roof beams, etc.

Individual fixing point without approval

For use in concrete < C20/25 and pressure-resistant natural stone

W-FAZ/S may only be used in dry indoor room conditions

Metric anchor diameter	M10
Anchor length (l)	90 mm
Attachment height (t fix)	10 mm
Max. attachment height reduced (t fix, red)	30 mm
Effective anchoring depth (h ef)	60 mm
Effective anchoring depth reduced (h ef, red)	40 mm
Disc diameter x disc thickness	30 x 2.5 mm
Width across flats	17 mm
Nominal drill-bit diameter (d 0)	10 mm
Drill hole depth (h 1)	75 mm
Drill hole depth reduced (h 1, red)	55 mm
Material	Steel
Surface	Zinc plated
Torque during anchoring (T inst)	25 Nm
Through-hole in the component to be connected (d f)	12 mm
Approval	ETA-99/0011

Performance data
Anchor diameter [mm]			M8		M10		M12		M16		M20	M24	M27
Admissible load when exposed to fire (R30, R60, R90, R120) see European Technical Assessment ETA-99/0011
Fire resistance rating		F30 [kN]	2,0	-	5,6	-	9,0	-	16,0	-	-	-	-
		F60 [kN]	1,0	-	2,2	-	3,5	-	7,0	-	-	-	-
		F90 [kN]	0,65	-	1,3	-	2,0	-	4,3	-	-	-	-
		F120 [kN]	0,5	-	0,8	-	1,3	-	3,0	-	-	-	-
Standard effective anchorage depth/ Reduced effective anchorage depth		h_ef/h_ef,red[mm]	46	35³⁾	60	40	70	50	85	65	100	115	125
Admissible centric tension load¹⁾ on an individual anchor without the influence of the edge distance	Tensile zone (cracked concrete C20/25^2₎, s ≥ 3 h_ef c ≥ 1.5 h_ef)	N_adm. [kN] = C20/25²⁾	2,4	2,4	4,3	3,6	7,6	6,1	11,9	9,0	17,1	21,1	24,0
	Compressive zone (non-cracked concrete C20/25²⁾ (s_cr,spandc_cr,sp see approval)	N_adm. [kN] = C20/25²⁾	5,7	3,6	7,6	4,3	11,9	8,5	16,7	12,6	24,0	29,7	33,6
Admissible shear load¹⁾ on an individual anchor without the influence of the edge distance	Tensile zone (cracked concrete C20/25²⁾, c ≥ 10 h_ef)	V_adm. [kN] = C20/25²⁾	7,0	7,0	11,5	10,4	17,1	14,5	31,4	21,6	37,1	59,2	67,1
	Compressive zone (non-cracked concrete C20/25²⁾, c ≥ 10 h_ef)	V_adm. [kN] = C20/25²⁾	7,0	7,0	11,5	11,5	17,1	17,1	31,4	30,2	37,1	65,1	94,1
Admissible bending moment		M_adm. [Nm]	13,1	13,1	26,9	26,9	46,9	46,9	123,4	123,4	195,0	513,1	760,9
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of γ_F = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and shear loads, the influence of the edge distance and groups of anchors. ²⁾ The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths. ³⁾ The use is limited to the anchorage of statically indeterminate systems.

Characteristic values
Anchor diameter [mm]		M8		M10		M12		M16		M20	M24	M27
Minimum edge distance Cracked concrete	c_min ≥ [mm]	40	_	45	_	60	_	60	_	95	100	180
Minimum edge distance Non-cracked concrete	c_min ≥ [mm]	50	_	50	_	75	_	80	_	130	100	180
Minimum edge distance Cracked concrete	for s ≥ [mm]	80	_	90	_	140	_	180	_	200	220	540
Minimum edge distance Non-cracked concrete	for s ≥ [mm]	100	_	100	_	150	_	150	_	240	220	540
Reduced minimum member thickness	h_min [mm]	80	80	100	80	120	100	140	140	-	-	-
Minimum spacing Cracked concrete	s_min ≥ [mm]	40	50	45	50	60	50	70	65	-	-	-
Minimum spacing Non-cracked concrete	s_min ≥ [mm]	40	50	60	50	60	50	80	65	-	-	-
Minimum spacing Cracked concrete	for c ≥ [mm]	70	60	90	100	100	160	160	170	-	-	-
Minimum spacing Non-cracked concrete	for c ≥ [mm]	80	60	140	100	120	160	180	170	-	-	-
Minimum edge distance Cracked concrete	c_min ≥ [mm]	40	40	50	65	60	65	80	100	-	-	-
Minimum edge distance Non-cracked concrete	c_min ≥ [mm]	50	40	90	65	75	100	90	170	-	-	-
Minimum edge distance Cracked concrete	for s ≥ [mm]	80	185	115	180	140	250	180	250	-	-	-
Minimum edge distance Non-cracked concrete	for s ≥ [mm]	100	185	140	180	150	185	200	65	-	-	-
Nominal drill diameter	d₀ [mm]	8		10		12		16		20	24	28
Diameter of cutting edges	d_cut≤ [mm]	8,45		10,45		12,5		16,5		20,55	24,55	28,55
Drill hole depth	h₁≥ [mm]	60	49	75	55	90	70	110	90	125	145	160
Through hole in the component being connected	d_f≤ [mm]	9		12		14		18		22	26	30
Torque while installing anchor	T_inst = [Nm]	20		25		45		90		160	200	300
Standard effective anchorage depth/ Reduced effective anchorage depth	h_ef/h_ef,red[mm]	46	35³⁾	60	40	70	50	85	65	100	115	125
Embedment depth	h_nom [mm]	52	41	68	48	80	60	97	77	114	133	146
Spacing	S_cr,N [mm]	138	105	180	120	210	150	255	195	300	345	375
Edge distance	C_cr,N [mm]	69	52,5	90	60	105	75	127,5	97,5	150	172,5	187,5
Standard minimum member thickness	h_std ≥ [mm]	100	_	120	_	140	_	170	_	200	230	250
Minimum spacing Cracked concrete	s_min ≥ [mm]	40	_	45	_	60	_	60	_	95	100	125
Minimum spacing Non-cracked concrete	s_min ≥ [mm]	40	_	45	_	60	_	65	_	90	100	125
Minimum spacing Cracked concrete	for c ≥ [mm]	70	_	70	_	100	_	100	_	150	180	300
Minimum spacing Non-cracked concrete	for c ≥ [mm]	80	_	70	_	120	_	120	_	180	180	300