W-RD plastic frame anchor With collar in natural colour.

Name: W-RD plastic frame anchor With collar in natural colour.
Brand: Würth
SKU: 0912808102

Plastic frame anchor, W-RD with collar
ANC-(W-RD)-PLA-W.COLLAR-10-8X60
ZEBRA

Art.-no. 0912808102

EAN 4049557393438

All versions

Similar products

Prices for customers after login

W-RD plastic frame anchor With collar in natural colour.

Art.-no. 0912808102

Prices for customers after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Without approval

Push-through installation

Immediate load-bearing capacity — no waiting

Low insertion torque of screw — slight expansion of the anchor, virtually no movement of the anchor sleeve

Strong twist lock

Expansion in four directions — high load-bearing capacities

Improved load transfer: Even, continuous load distribution across the entire expansion area

The hammer-in stop prevents premature expansion of the anchor during installation

Anchorage via friction locking and positive locking (perforated brick) between anchor sleeve and anchoring base

Anchor sleeve made of high-quality polyamide

Halogen and silicon-free

Thermally stable from -40°C to +80°C

Proof of Performance

Performance data determined in Würth test laboratory

Notice

Useful information:

Drill perforated and hollow blocks with a rotary drill (without impact mechanism).

Drilling dust must be removed from the drill hole.

Screw length = anchor length + 1 x screw diameter.

Use wood or particle board screws WITHOUT an optimised thread tip (drill bit, counter thread, ring thread etc.).

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Performance data determined in Würth test laboratory

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Secondary attachments: Concrete and masonry made from solid and perforated brick

Universal plastic frame anchor for light and medium loads

W-RD can be anchored in the following anchoring bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, vertically perforated brick, perforated sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete)

Installation temperatures: Temperature of anchoring base: ≥ -20°C, temperature of anchor sleeve: ≥ 0°C

Suitable for attaching wardrobes, curtain rails, wall shelves, light wall cupboards, wall-mounted cabinets, mirrors, picture frames, cable clamps, electrical switches, wash basins, wooden beams, wooden slats, metal rails, angle brackets, profiles, signs etc.

For attaching components in conjunction with a wood or particle board screw without an optimised thread tip (e.g. drill tip, counter thread, ring thread etc.)

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Anchor diameter	8 mm
Anchor length (l)	60 mm
Max. attachment height (t fix)	10 mm
Nominal drill-bit diameter (d 0)	8 mm
Through-hole in the component to be connected (d f)	8.5 mm
Screw diameter	6 mm
Drill hole depth (h 0)	60 mm
Drill hole depth (h 1)	60 mm
Type description	W-RD 8, with collar

Performance data
Anchor diameter [mm]			6	8	8	10
Anchoring depth h_ef [mm]			50	50	70	70
Permissible load¹⁾ (Tensile, transverse and oblique pull at every angle)	Concrete	F_rec [kN] ≥ C20/25¹⁾	0,4	0,4	0,5	0,5
	Solid brick Mz, EN 771-1, DIN 105 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Mz 36¹⁾	0,2	0,3	0,4	0,3
	Solid sand-lime brick KS, EN 771-2, DIN 106 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ KS 20¹⁾	0,4	0,4	0,5	0,5
	Solid bricks and solid blocks made of standard concrete EN 771-3, DIN 18153 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Vbn12¹⁾	0,4	0,4	0,6	0,6
	Solid bricks and solid blocks made of lightweight concrete EN 771-3, DIN V 18152-100 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ V4¹⁾	0,1	0,2	0,3	0,3
	Vertically perforated brick HLz, EN 771-1, DIN 105 ≥ 2DF (≥ 240 x 115 x113)	F_rec[kN] ≥ Hlz 20¹⁾	0,1	0,2	0,2	0,1
	Hollow sand-lime brick KSL, EN 771-2, DIN 106 ≥ 2DF (≥ 240 x 115 x113)	F_rec [kN] ≥ KSL 6¹⁾	0,1	0,2	0,4	0,4
	Hollow block made of lightweight concrete 3K Hbl, EN 771-3, DIN 18151 ≥ 16DF (≥ 497 x 237 x 241)	F_rec [kN] ≥ Hbl 6¹⁾	0,1	0,2	0,1	0,3
¹⁾ The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97.

Characteristic values
Concrete	Axis distance	s ≥ [mm]	100	100	100	100
	Edge spacing	c ≥ [mm]	70	70	70	140
	Minimum component thickness	h_min ≥ [mm]	100	100	100	100
Masonry	Axis distance	s ≥ [mm]	250	250	250	250
	Edge spacing	c ≥ [mm]	100	100	100	100
	Minimum component thickness	h_min ≥ [mm]	115	115	115	115
Nominal drill diameter²⁾		d₀ [mm]	6	8	8	10
Drill hole depth		h₀ ≥ [mm]	60	60	80	80
Anchoring depth³⁾		h_nom ≥ [mm]	50	50	70	70
Through hole in component being connected		d_f ≤ [mm]	6,5	8,5	8,5	10,5
¹⁾ The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97 (art. no. 0157 0. …). ²⁾ If the drilling hole is created in the perforated brick with impact and hammer action, the load capacity is reduced. ³⁾ The anchors must be positioned in such a way that the spreading part is anchored in the web of the stone.

Additional accessory:

Product

Description

Quantity

Price
/PU

DIN 7997 plug screw Countersunk Phillips head

SCR-PLG-DIN7997-Z3-(A2K)-6X70

Art.-no. 015706 70

DIN 7997, steel, blue zinc-plated, partial thread, countersunk head, PZ cross recess drive

x 100 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).