W-SD WSS 1/L impact anchor
Impact anchor W-SD WSS 1/L
DWL-(W-SD/W-WSS1/L1)-(A2K)-M6X40
Register now and access more than 125,000 products
Stop bits must be used (approval is subject to use of a stop bit)
Anchors and stop bits form a perfectly coordinated system. This system unit prevents installation errors and ensures attachment as stipulated in the approval.
- WSS: Pre-assembled unit (anchor, insulating part and hanger) ensures quick and easy insertion
- Acoustic insulation directly on the raw ceiling ensures long-lasting, technically sound compliance with DIN 4109
- Immediate load-bearing capacity — no waiting
- Minimal suspension height
Dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for "Metal Anchors for Use in Concrete", Appendix C, measurement process C
Fire resistance (anchoring base: concrete C20/25 to C50/60): R30, R60, R90, R120: Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-07/0138)
Dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for "Metal Anchors for Use in Concrete", Appendix C, measurement process C
Fire resistance (anchoring base: concrete C20/25 to C50/60): R30, R60, R90, R120: Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-07/0138)
Datasheets(X)
Suitable for attaching perforated strips, eyelets or wire hooks, vernier hangers etc.
Anchor diameter | 6 mm |
Anchor length (l) (l) | 61 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Type description | W-SD W-WSS 1/L |
Centre-to-centre distance (a) | 200 mm |
Edge clearance (a r) | 100 mm |
Minimum component thickness (d) | 100 mm |
Drill hole depth (t) | 42 mm |
Performance data | ||
Anchor diameter [mm] | WSS 1/L | |
Anchors in a redundant non-structural system of non- load-bearing systems in concrete (For all load directions) For c ≥ 150 mm for s ≥ 200 mm | Fadm [kN] ≥ C20/25 and ≤ C50/60 | 1,4 |
Admissible load when exposed to fire (R30, R60, R90, R120) see European Technical Approval ETA-07/0138 | ||
Characteristic values | ||
Spacing | scr ≥ [mm] | 200 |
Edge distance | ccr ≥ [mm] | 150 |
Drill hole depth | h1 ≥ [mm] | 42 |
Effective anchorage depth | hef ≥ [mm] | 36 |
Minimum member thickness | hmin ≥ [mm] | 80 |
Thread dia. | dthr [mm] | 6 |
Nominal drill diameter** | d0 [mm] | 6 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!