W-VI-IG internally threaded anchor, zinc-plated steel
Female thread anchor W-VI-IG/S steel zinc plated
ANC-(W-VI-IG/S)-(A2K)-M12X125
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE-EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/S (zinc-plated steel) can be used in dry indoor areas
Type description | W-VI-IG/S |
Female thread | 12 mm |
Length | 125 mm |
Nominal drill-bit diameter (d 0) | 22 mm |
Effective anchoring depth (h ef) | 125 mm |
Drill hole depth (h 0) | 125 mm |
Min./max. screw-in depth | 12-30 mm |
Required injection mortar | WIT-UH 300, WIT-PE 1000 |
Approval | ETA-17/0127, ETA-19/0542 |
Material | Steel |
Surface | Zinc plated |
Datasheets(X)
Last viewed
Door handle AL 920
Heat protection glove Ejendals TEGERA® 6614
Twist drill bit assortment HSS DIN 338 type RN 118° 19 pcs
Key, high profile DIN 6885, stainless steel 1.4571, shape A
ECOFAST® chipboard screw
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Hexagonal nut, high profile with clamping piece (non-metal insert) DIN 982, steel 10, zinc-plated, blue passivated (A2K)
Disposable protective clothing
Label carrying system for identification rings
Stretch X shorts
