W-VI-IG internally threaded anchor, zinc-plated steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female thread anchor W-VI-IG/S steel zinc plated
ANC-(W-VI-IG/S)-(A2K)-M6X90
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE-EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/S (zinc-plated steel) can be used in dry indoor areas
Type description | W-VI-IG/S |
Female thread | 6 mm |
Length | 90 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Effective anchoring depth (h ef) | 90 mm |
Drill hole depth (h 0) | 90 mm |
Min./max. screw-in depth | 8-20 mm |
Required injection mortar | WIT-VM 250 |
Approval | ETA-16/0757 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Precision crepe tape
5/16-inch socket wrench insert hexagon, with magnet
E 6.3 PZ bit (1/4 inch)
Cover profile, NBR
1/2 inch impact socket wrench set
Multi-use bimetal bandsaw blade One blade for any job
Bracket set For DWD XP wooden back panel H182 frame system
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Work trousers
Drilling screw, hexagon head with sealing washer pias®