W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

Name: W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Brand: Würth
SKU: 0905441203

Anchor rod W-VIZ-A/S zinc-plated steel
ANC-(W-VIZ-A/S)-(A2K)-50-M12X150

Art.-no. 0905441203

EAN 4045727195840

All versions

Specification

The bonded anchor is suitable for cracked concrete (concrete tensile zone) and non-cracked concrete (concrete compressive zone)

The drill holes can be created using a hammer drill (W-VIZ M8 to M24), vacuum drill (W-VIZ M10 to M24) or diamond drill process (W-VIZ M10 to M24)

Attachment with low expansion pressure allows minimum spacing and edge distances

Mechanical drill hole cleaning: Easy handling, very good drill hole cleaning, high loads

Force-controlled/torque-controlled expansion anchors made of zinc-plated steel in sizes M8, M10, M12, M16, M20 and M24

The load is transferred via the mechanical interlocking of individual cones in the injection mortar and also via a combination of retention and frictional forces in the base material (concrete)

Notice

Suitable injectable mortar: WIT-VIZ, WIT-VIZ Express

European technical assessment ETA-04/0095 for fixing point option 1, cracked and non-cracked concrete, seismic performance category C1 and C2

Application area

The anchor has a European technical assessment for use in reinforced or unreinforced normal weight concrete with a concrete compressive strength of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12

Anchorage with a European technical assessment in cracked concrete (concrete tensile zone) and non-cracked concrete (concrete compressive zone)

Static (e.g. dead load, equipment, storage materials) or quasi-static (e.g. staircase railings) actions: M8 to M24

Anchor size M12 to M24: Installation in drill holes filled with water (exception: W-VIZ-A 75 M12 - installation in water-filled drill holes not permitted)

For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

Suitable for fastening metal structures, metal profiles, brackets, base plates, supports, railings, wooden structures, beams etc.

Instructions

Clean the drill hole: 2x blow-out, 2x mechanical brush-out, 2x blow-out

If the drill hole is M20 or larger, blow out with pneumatic air using the appropriate pneumatic air nozzles

Type description	W-VIZ-A/S
Metric anchor diameter	M12
Effective anchoring depth (h ef)	80 mm
Attachment height (t fix)	50 mm
Anchor length (l)	150 mm
Nominal drill-bit diameter (d 0)	14 mm
Drill hole depth (h 0)	85 mm
Required injection mortar	WIT-VM 100, WIT-Express, WIT-VIZ, WIT-VIZ express
Approval	ETA-04/0095
Material	Steel
Surface	Zinc plated
Through-hole in the component to be connected (d f)	14 mm