W-VIZ/A4 AP single anchor point

Name: W-VIZ/A4 AP single anchor point
Brand: Würth
SKU: 0838921501

Single anchor point W-VIZ/A4 AP
ANCPT-W-VIZ/A4 M20 AP 500

Art.-no. 0838921501

EAN 4052712227547

All versions

Specification

Fall protection system with integrated fall indicator for quick and easy installation in concrete. Drill and clean out hole, glue in anchor point, job done!

360° rotating anchor eye

The integrated fall indicator on the anchor point indicates a fall

Version with 500-mm rod length available

Reduced force transmission to the structure through defined plastic deformation in the event of a fall

Highly resistant to corrosion and weathering: The single anchor point is made from A4 stainless steel

Notice

Fixing in concrete permissible exclusively with Würth WIT-VIZ injectable mortar

Observe the injectable mortar curing times

Observe the installation instructions and approvals for the fasteners and single anchor point.

With general construction permit Z-14.9-692

Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415

Application

Application area

Suitable for securing up to a maximum of 3 persons in conjunction with personal protective equipment against falling

The single anchor point can be used for e.g. maintenance and assembly work on flat roofs etc.

The single anchor point may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12

Technical information

Material	Stainless steel A4, 1.4401
Rod length	500 mm
Diameter	20 mm
Height	500 mm
Surface	Stainless steel FINISH

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Application gun WIT

APPLGUN-F.DWL-WIT-330ML

Art.-no. 0891003

For pressing out WIT cartridges (150 ml, 280 ml, 320 ml, 300 ml, 330 ml) and silicone cartridges

x 1 pcs

FILL & CLEAN static mixer

MIX-DWL-PLA-WIT

Art.-no. 0903420001

For WIT cartridges of WIT-VM 250, WIT-VM 100, WIT-Nordic, WIT-Express, WIT-PM 200, WIT-EA 150 systems with cleaning element

x 10 pcs

Mixer nozzle extension WIT-MV

EXT-(F.MIX-DWL)-PLA-10X200

Art.-no. 0903420004

Extension for the mixer nozzle

x 10 pcs

Blow-out pump for drill hole cleaning

BLWOTPMP-F.BRHOCLN-LAR

Art.-no. 0903990001

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).