W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M18
Art.-no.
4625000154
EAN 4056808647349
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Manual tool for screwing in wire thread inserts
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M18x2,5 |
Material | Steel |
Product information
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Checker plate box
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Clip connector For wall and ceiling sander WSS 225-E Compact
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
Polishing pads
Cutting disc Klingspor A 46 TZ Special
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Threaded fitting
A2 stainless steel cross handle with male thread, blasted
Fleece sanding sleeve For expansion and inflatable rollers
