W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M2,5
Art.-no.
4625000153
EAN 4053478181449
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Manual tool for screwing in wire thread inserts
Product information
Datasheets(X)
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M2,5x0,45 |
Material | Steel |
Last viewed
Work trousers
Work shorts
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Solar double pipe clamp
Work trousers
Cleaning paper
Fleece sanding sleeve For expansion and inflatable rollers
Tray shelf
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, zinc-plated, blue passivated (A2K)
Oval rosette Stainless steel, outer PZ