W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M26/M27
Register now and access more than 125,000 products
Datasheets(X)
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M26x1,5 |
Material | Steel |
Last viewed
Add-on torque wrench head Stahlwille 732/40 box-end torque wrench head with square drive
High-performance anchor with stud bolts W-HAZ-B/A4
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 12.9, plain, with full thread
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Balcony sealing and uncoupling membrane CERAfix® 315
3/8" socket wrench With multi profile, hexagon, short
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Slotted cheese head DIN 84, A4 stainless steel, plain
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
ASSY®plus FT, milling pocket head timber screw