W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M33
Art.-no.
4625000174
EAN 4056808656020
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Manual tool for screwing in wire thread inserts
Product information
Datasheets(X)
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M33x3,5 |
Material | Steel |
Last viewed
Shaft tube For traffic sign
Safety boots, S2
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Spring band clamp DIN 3021, shape B, W.TEC
Twist drill bit assortment HSS DIN 338 Type RN 118° 25 pcs
Work pullover HAKRO 471 premium sweatshirt
Hexalobular-type cheese head screw, low head ISO 14580, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Threaded rod DIN 976, A2-70 stainless steel, shape A
Countersunk head screw with recessed head Z DIN 965, A2 stainless steel, plain
Silicon lead SIFF assortment 90 pieces in system case 4.4.1