W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M4
Art.-no.
4625800044
EAN 4046778360379
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Manual tool for screwing in wire thread inserts
Product information
Datasheets(X)
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M4x0,7 |
Material | Steel |
Last viewed
Chemical protective glove Ansell Ringers R074
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Cage nut WN 0381 zinc-plated steel, blue passivated (A2K) without circlip
Pull handle ST/A110
Cylindrical pin, hardened DIN 6325, steel, plain
Helical insert W.TEC® INSERT COIL Screw Grip fine thread
Stretch X ladies' trousers
Hi-vis softshell jacket T402
Sanding strip film Mirka Galaxy
Fork joints with split pin DIN 71751, with cotter bolts, zinc-plated, blue passivated (A2K)