W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Manual screw-in tool
SCRINTL-MAN-ST-M6
Art.-no.
4625800046
EAN 4052713404794
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Manual tool for screwing in wire thread inserts
Product information
Datasheets(X)
Instructions1. Engage the drive tang of the wire thread insert using the groove of the screw-in tool.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
2. Apply light pressure to screw the thread insert into the receiving thread until it sits 1/4 to 1/2 rotations below the surface. The adjusting ring on the tool can be set to prevent the thread insert being screwed in too deeply.
Caution: Do not turn against the direction of rotation as this risks breaking the tang.
Suitable for thread insert | M6x1 |
Material | Steel |
Last viewed
Pneumatic trolley jack P152C
Application bottle STAMCOLL N55
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
Drift punch According to DIN 6458
Retaining plate, lightweight fastener OMG-DVP-GDL
Pan head bed fittings
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Screw with flattened half round head and hexagon socket