WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-nickel-plated, black passivated (P3R)
TX WÜPLAST W1423 stl 10.9 ZN-NI black counters TX
SCR-CS-W1423-T20-10.9-(P3R)-5X22
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 22 mm |
Head diameter (dk) | 9.3 mm |
Material | Steel |
Property class | 10.9 |
Surface | Zinc nickel black |
Internal drive | TX20 |
Other standard | Company standard |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
Holder, die Ruko DIN 225
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Low-cut safety shoes, S3
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Polymer surface protection
Abrasive flap disc Klingspor SMT 624 Supra
ASSY® 4 A2 WH washer head screw A2 stainless steel plain partial thread washer head
Machine screw tap, combined Ruko bit "long" HSS plain
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Slotted set screw with truncated cone DIN 551, steel, 14H, plain