WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-nickel-plated, black passivated (P3R)
TX WÜPLAST W1423 stl 10.9 ZN-NI black counters TX
SCR-CS-W1423-T8-10.9-(P3R)-3X8
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 5.5 mm |
Material | Steel |
Property class | 10.9 |
Surface | Zinc nickel black |
Internal drive | TX8 |
Other standard | Company standard |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
90° insertion bend for electrical conduit WPKu-EM-F-H0
Circlip, shaft inch
Work dungarees
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S1
Shim ring DIN 988, steel, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Flat washer
Manual taper tap Ruko hand tap HSS DIN 352 Whitworth BSW taper tap
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain