WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-plated, transparent passivated (A3K)
WÜPLAST W1423 steel 10.9 zp countersunk head TX
SCR-PLA-CS-W1423-T8-10.9-(A3K)-3X6
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 6 mm |
Head diameter (dk) | 5.5 mm |
Material | Steel |
Property class | 10.9 |
Surface | Zinc plated |
Internal drive | TX8 |
Other standard | W1423 |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
Toilet paper dispenser
CLIP-O-FLEX® multi-purpose level For assembly workstation with opening cut-out 975 mm
pias® drilling screw, flat head with AW drive
Solid carbide metal twist drill bit Ruko DIN 338 type N TiAlN
Hexagonal bolt with flange in accordance with MBN standard
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Jacket Planam MG 260
Jacket Planam MG 260
Blind rivet, flat head
Threaded pipe fittings