WÜPLAST® pan head screw with flange
WÜPLAST W1411 steel 10.9 plain pan washer head Z
SCR-FLG-W1411-Z1-10.9-3X10
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 10 mm |
Material | Steel |
Property class | 10.9 |
Surface | Plain |
Internal drive | Z1 |
Thread type | Plastic screw thread |
Pitch | 1.34 mm |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Countersunk rivet
O-ring, metric
Stud
HSCo Multi Special MF thread machine tap for blind holes DIN 374
Workshop scheduler, two rows DIN A4
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Hexagon nut ISO 4032, steel 5-2, plain, for pressure container construction
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Quick-connect nipple
Serrated washer, externally serrated, shape AZ DIN 6797, A4 stainless steel
