WÜTOP Uni-Roll ridge and hip roll
RIDGROLL-(UNI-ROLL)-ANTHRACITE-0,3X20M
Art.-no. 0681000083
EAN 4046778118772
Register now and access more than 125,000 products
- UV-stabilised and non-rotting PVC with aluminium sealing strips along sides
- Rounded edges prevent hand injuries
- Extremely flexible and easy to install
- Butyl rubber with excellent adhesive strength
- Ventilation cross-section in line with DIN 4108: approx. 160 cm2, sufficient for approx. 16 m rafter length.
Conduct your own adhesion tests on tiles with hard silicone coatings.
Datasheets(X)
- The substrate must be clean, dry and free from dust and grease
- WÜTOP Uni-Roll is rolled out along the centre of the ridge or hip batten and tacked or nailed in place
- Peel the protective film off the adhesive strip, then press the adhesive on both sides simultaneously firmly onto the top row of roof covering and smooth down into the trough
- WÜTOP Uni Roll can be cut using standard scissors
Colour | Anthracite |
Length of roll | 10 m |
Roll width | 300 mm |
Number of rolls | 2 PCS |
Ventilation cross section | 160 cm² |
Min. processing temperature | 5 °C |
Last viewed
Parallel pin, unhardened ISO 2338 steel plain (m6)
Print material FFF Greentec Flax
Hexagonal bolt with shank ISO 4014, 12.9 steel with silver zinc-flake coating (ZFSHL)
Twist drill bit HSS DIN 1869 R1 type RN
4-in-1 natural stone sealant
Locking system DUAL
Cut protection glove Ansell HyFlex® 11-727
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with flange EN 1665, black zinc-nickel plated 8.8 steel (ZNBHL)