WÜTOP ridge and hip, strong
WÜTOP ridge and hip, strong
RIDGROLL-WÜTOP-(STRONG)-ANTHRA-0,32X20M
Register now and access more than 125,000 products
- Can be processed quickly and easily
- Extremely robust due to bonded and sewn connection between the geotextile and aluminium
- The adhesive system is activated by removing the cover film
- Shaped for optimum adaptability
- Ensures optimum ventilation according to DIN 4108
- With a ventilation cross-section of approx. 170 cm²/lfm
Datasheets(X)
- The surface must be clean, dry and free from grease and dust
- WÜTOP roll ridge is tacked to the start of the ridge rafter in the middle
- Remove 50–70 cm of masking paper from the adhesive
- Simultaneously press the adhesive firmly onto the top row of tiles on both sides and smooth down into the trough. Tack every 1–2 m if necessary
- WÜTOP-STRONG roll ridge can be cut using standard scissors
Colour | Anthracite |
Length of roll | 5 m |
Roll width | 320 mm |
Number of rolls | 4 PCS |
Ventilation cross section | 170 cm² |
Min. processing temperature | 5 °C |
Ultraviolet resistance | Yes |
Min. temperature resistance | -30 °C |
Max. temperature resistance | 80 °C |
Building material class | B2 - Normally inflammable |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Min./max. processing temperature | 5 to 40 °C |
Building material class conditions | in accordance with DIN 4102 |
Length | 20 m |
Last viewed
ABS Sealing cuff PE/PP/PVC
Nature jacket
Cable gland, brass PG
Twist drill bit HSCo DIN 340 type RN OXIDE
Socket wrench set 1/4 inch and 1/2 inch 59 pieces - limited edition
Hexagonal bolt
TMQ70/3 table frame
Hexagonal bolt
Hole saw Ruko tungsten carbide multigrade hole saw
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain