WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head - SCR-CS-WO-TX20-(A3K)-5X50/42

WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head - SCR-CS-WO-TX20-(A3K)-5X50/42 - 1

WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head - SCR-CS-WO-TX20-(A3K)-5X50/42 - 2

WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head - SCR-CS-WO-TX20-(A3K)-5X50/42 - 3

WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head

Name: WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head
Brand: Würth
SKU: 0176205050

WÜTOX CS steel zinc plated FT countersunk TX
SCR-CS-WO-TX20-(A3K)-5X50/42
WÜTOX CS

Art.-no. 0176205050

EAN 4065746403986

All versions

Similar products

Prices for customers after login

WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head

Art.-no. 0176205050

Prices for customers after login

Quantity

x 250 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Full-thread screw with countersunk head for fastening fittings or cabinet connectors to wood or wooden panels in dry indoor areas or wet areas.

Power transmission through TX drive

Good power transmission through star drive

Low splitting effect in edge area

The wood is less likely to split due to the ring all around the tip

90° countersunk head

For neatly countersinking the head into furniture or metal fittings

Rapid bite

Clean threads down to the tip

Notice

Do not use the screw in applications with direct exposure to the elements or in wet rooms with atmospheres containing chlorine gas.

WÜTOX screws are optimised for use in wood and engineered wood. For applications in plastic anchors where the load can also be reduced, use only screws without an optimised thread tip (tip with milling ribs, drill tip, self-clearing groove etc.), such as the ASSY D screws with countersunk head or pan head.

CE in accordance with EN 14592

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For steel-to-wood connections designed for pull-out loads

The full thread starts immediately below the head and is designed for pull-out loads, e.g. fitting-to-wood or sheet material-to-wood connections. The maximised thread length increases the screw's pull-out strength.

For applications in utilisation class 1 and 2 (from diameter > 4 mm)

High-quality surface protection, zinc, blue passivated, chromium(VI)-free, up to dia. 4 mm A2K 5 µm, from dia. 4.5 mm A3K 8 µm layer thickness

Suitable for use in utilisation class 1 (interior) and from diameter > 4 mm in utilisation class 2 (wet area or covered outdoor area) according to EN 1995-1-1:2010-12 + DIN SPEC 1052-100:2013-08.

For screws from diameter 4.5 mm with a zinc layer thickness of 8 µm and Cr(III) passivation, the requirement of classification T2/C2 is fulfilled in accordance with prEN 14592:2017 (D).


Nominal diameter (d)	5 mm
Length (l)	50 mm
Head type	Countersunk head
Head diameter (d_h)	9.5 mm
Head height (k)	3.3 mm
Internal drive	TX20
Thread type	Wood screw thread
Thread design	Full thread
Thread form	Single start thread
Thread length (lg)	42.0 mm
Core diameter	3.2 mm
Shape of tip	Tip with ring thread
Angle of the tip	34 Degree
Material	Hardened steel
Surface	Zinc plated
Min./max. screw-in angle	45-90 Degree
Product weight (per item)	4.150 g
Suitable for use in the following materials	Board ply wood (BSP), Hardwood, LVL
Area of application	Universal, Furniture, Body, Fitting
Suitable machines	Würth BS 14-A solid combi
Screw requiring approval	No
EN standard	14592
RoHS-compliant	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

C 6.3 TX bit (1/4 inch)

BIT-TX6-1/4IN-L25MM

Art.-no. 06143106

Short design for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX7-1/4IN-L25MM

Art.-no. 06143107

Short design for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX8-1/4IN-L25MM

Art.-no. 06143108

Short design for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX9-1/4IN-L25MM

Art.-no. 06143109

Short design for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX10-BLUE-1/4IN-L25MM

Art.-no. 06143110

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX15-YELLOW-1/4IN-L25MM

Art.-no. 06143115

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX20-WHITE-1/4IN-L25MM

Art.-no. 06143120

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX25-BLACK-1/4IN-L25MM

Art.-no. 06143125

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX27-1/4IN-L25MM

Art.-no. 06143127

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX30-RED-1/4IN-L25MM

Art.-no. 06143130

Short design for all common TX screw sizes

C 6.3 TX bit (1/4 inch)

BIT-TX40-GREEN-1/4IN-L25MM

Art.-no. 06143140

Short design for all common TX screw sizes

C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)

BIT-TX45-5/16IN-L35MM

Art.-no. 06143145

Bit for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX45-1/4IN-L25MM

Art.-no. 061431450

Short design for all common TX screw sizes

x 5 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX45-1/4IN-L35MM

Art.-no. 061431451

Short design for all common TX screw sizes

x 10 pcs

C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)

BIT-TX50-5/16IN-L35MM

Art.-no. 06143150

Bit for all common TX screw sizes

x 10 pcs

C 6.3 TX bit (1/4 inch)

BIT-TX50-1/4IN-L35MM

Art.-no. 061431501

Short design for all common TX screw sizes

x 10 pcs

C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)

BIT-TX55-5/16IN-L35MM

Art.-no. 06143155

Bit for all common TX screw sizes

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).