Wall sleeve
Wall sleeve WP plastic pipe
PIPLDTHRGH-WALLSLEEVE-PLAPIP-HP-D125
Register now and access more than 125,000 products
- Consisting of a corrugated plastic wall sleeve for mortaring in and heat-shrink tubing for sealing
Datasheets(X)
Suitable for pipe diameter | 125 mm |
Material of profile | HDPE - High density polyethylene |
Length | 500 mm |
Diameter | 160 mm |
Colour | Black |
Last viewed
Hammer-in anchor W-SD with connecting thread
Pan Head screw with hexalobular head ISO 14583, steel 8.8, zinc-plated, blue passivated (A2K)
Pipe protective cap W.TEC® COVER CAP WP 250 Polyethylene, yellow
S3L safety boot Heckel Maccrossroad3.0 high
Hexagon nut with clamping piece (non-metal insert) fine thread ISO 10512, steel 10, zinc-plated, blue passivated (A2K)
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Parallel pin, unhardened ISO 2338 steel plain (m6)
IFI-145 steel GR5 zinc flake silver (ZFSHL)
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B