Waterproof mortar
Waterproof mortar
ASMBYMORT-QCK-25KG
Register now and access more than 125,000 products
Swells easily
- Watertight, as the mortar does not tend to form shrinkage cracks
- Seals with high degree of functional reliability
Ready for use
Can be mixed with water immediately, reduced application outlay
Hardens quickly
Brief waiting periods until further work can be performed, saving both time and money
For repair work and for forming hollows
- For a broad range of applications
- Reduced costs due to lower material stockpiling
Outstanding adhesion to mineral surfaces
Can be used on all common mineral surfaces, resulting in a high level of application reliability and little need to stockpile materials
Can be used in old and new buildings
Versatile applications, costs reduced due to low material stockpiling
The waterproof mortar contains cement; avoid contact with skin
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
Mix the waterproof mortar: Mix approx. 4-4.5 litres of water to a bag of waterproof mortar (25 kg) using a slow agitator, art. no. 0702 836 0, and a mixing paddle, art. no. 0713 95 121. ¾ of the water must be added and mixed with the powder to make a pasty mortar compound. Add the rest of the water after approx. 3 minutes of mixing time until the required consistency is achieved. For forming a proper hollow, the waterproof mortar must be applied with an arm length of approx. 4-6 cm on the wall/base area and formed in a round shape.
A period of approx. 24 hours must pass before further work can be performed on the surface. The freshly made hollow must be protected from rain, frost, water and direct sunlight.
Chemical basis | Quartz sands/cements |
Colour | Grey |
Density | 1.8 kg/l |
Min. working life | 10 min |
Max. working life | 15 min |
Further processing conditions | bituminous material |
Min. curing time | 10 min |
Min. processing temperature | 5 °C |
Max. processing temperature | 35 °C |
Min. surface processing temperature | 5 °C |
Max. surface processing temperature | 35 °C |
Min. curing temperature | 5 °C |
Max. curing time | 15 min |
Fully hardening/curing conditions | 20°C |
Application quantity in weight/volume | 1.8 kg/l |
Application quantity conditions | Hollow space |
Weight of content | 25 kg |
Container | Sack |
Shelf life from production | 6 Month |
Conditions to maintain shelf life from production | cool and dry storage area |
Additional articles | Safety glasses, art. no.: 0899102...; protective gloves, art. no.: 0899435...; plasterers' trowel, art. no.: 057711012...; brick trowel, art. no.: 0695943...; agitating basket, art. no.: 071395... |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Compact workshop trolley
ECOFAST ASSY® 3.0 Hardwood screw, stainless steel
Box-end wrench with square insert shank 14x18 mm
Protective glove, leather
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Flap hinge TIOMOS
Connecting technology
Welding plate DIN3015-1, long version (L), W.TEC series
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal