Wax underseal
Wax underseal
UBS-WAX-PERMANENT-BLACK-1000ML
Register now and access more than 125,000 products
- Water-repellent anti-corrosion wax with very good penetration properties and self-healing effect.
- The dry coating remains slightly sticky and is temperature resistant up to approx. 180 °C, meaning it can also be used in temperature-sensitive areas.
Recommended dry layer thickness: at least 50 μm. The product must be stirred/shaken before use! After application, turn the aerosol can upside down and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Universal anti-corrosion coating for vehicles, machines, machine parts and many other applications, such as:
- Automotive industry
- Bus and trailer construction
- Bodywork construction
- Garages, workshops
- Metal industry
- General industry
- Shipbuilding
- Maintenance and much more
For areas at risk of corrosion in bodywork such as sheet metal seams (folds, gaps, flanges), edges and surfaces. Excellent adhesion and very good stability on metallic surfaces
Shake well or stir thoroughly before use. The surfaces to be treated must be clean, dry and free from rust, dust and grease. The product can be applied using airless or airmix guns or with a pressure cup spray gun at an air pressure of 3-4 bar. If necessary, the product can also be applied by dipping, rolling or brushing on. The product can be applied without overspray and does not drip. Contaminated surfaces and dirty equipment can be cleaned with solvents while fresh. The recommended application temperature is between 15 and 25 °C.
Chemical basis | Wax |
Contents | 1000 ml |
Weight of content | 850 g |
Colour | Black |
Min. proportion of solids | 42 % |
Conditions for through drying | at 20°C, 65% relative humidity, 400 µ wet |
Conditions for skin-formation time | 20°C, Ri 0 at 65% relative humidity, 100 µ wet layer thickness |
Min. skin-formation time | 105 min |
Drying time | 5 h |
Density | 0.85 g/cm³ |
Density conditions | at 20°C |
Shelf life from production | 24 Month |
Max. temperature resistance | 180 °C |
Min. temperature conditions | -25 °C |
Min. temperature resistance | -25 °C |
Recoatable/Can be painted over | No |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Tool case, accessories
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
45° elbow with female thread EN10242 A1/45°, hot-dip galvanised malleable iron
Support clip type SPW
Taper-grooved dowel pin ISO 8745 steel plain
Hexagonal bolt with shank
Tiomos M0 Click-on 125 hinge
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Screw tap, machine, blind hole Ruko M DIN 376 HSCo plain shape C
Highly flexible extension For tyre valve