Wedge and wheel lock nut
Steel 10 Delta Protekt
NUT-WDGELOK-WS24-(DPE)-M16
Register now and access more than 125,000 products
General:
The wedge and wheel lock nut combines a flange nut and a wedge lock washer. This combination provides a high-quality, user-friendly and easy-to-install locking device for demanding screw connections. Wedge lock nuts can also be reused.
Design
The flange nut and wedge lock washer form a single unit and are supplied pre-assembled. The connector is captive ensuring that the wedge lock nut is always correctly positioned and installed.
Wedge lock nuts are ideal for applications involving dynamic loads and extreme vibration. In cases such as these, the combination of nut and wedge lock washer enables screw connections to be installed even more easily and efficiently.
 | |
Thread type x nominal diameter (d1) | M16 |
Pitch | 2 mm |
Flange diameter (d2) | 34.5 mm |
Height (h) | 21.2 mm |
External drive | WS24 |
Material | Steel |
Property class | 10 |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 600 h |
Locking function | Locking against self-loosening by mechanical interlocking |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Tool clamp For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Knob cylinder 3KS
Collated nail UMA 221/10
Slotted flat-head screws with small head DIN 920, steel 5.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank
Water pump pliers DIN ISO 8976
EPS profile thumbturn cylinder for keyed alike systems with original equipment
