Wedge lock washer W.TEC, narrow shape
254SMO narrow shape W.TEC
WSH-WDGELOK-SF-254SMO-14
W.TEC
Register now and access more than 125,000 products
General:
Lock washer in accordance with DIN 25201 to prevent loosening in laterally loaded and vibrating screw connections and screw connections subject to oscillations.
Function:
Highly secure locking as wedge surfaces slope up between the two lock washers. The screw connection is locked by pretension instead of by friction.
Advantages:
- Easy installation/removal (wedge lock washers are already glued in pairs)
- Tested system for threadlocker (locking elements that prevent loosening), at high as well as low pretension
- Especially suitable for dynamic loading - including when lubricants are used
- Can be reused multiple times without loss of quality
- Protects surfaces
- With a narrow and a wide contact surface
Datasheets(X)
 | |
Internal diameter (d1) | 15.2 mm |
Suitable for screw thread | M14 |
Outer diameter (d2) | 23 mm |
Thickness (h1) | 3.1 mm |
Material | Stainless steel, 1.4547 |
Vickers hardness, HV | 520 HV |
Surface | Plain |
RoHS-compliant | Yes |
Design | Narrow |
Locking device operating principle | 0 - not applicable |
Locking function | Locking against self-loosening by mechanical interlocking |
Last viewed
Screwdriver slotted 3C handle with hexagon shank
Double cylinder S5 locking system
Heat-shrink solder butt connector
Lock washer DIN 127, steel, mechanically applied zinc coating, shape A
Grooved pin with half round head DIN 1476, steel, plain
Low-cut safety shoes, S2
Machine screw tap, through hole Ruko UNF DIN 2183 HSCo plain shape B
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Cover plate DIN 3015-2, single version (DP-A), W.TEC series
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11