Weld-in bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Weld-in bulkhead fitting steel
TUBFITT-ISO8434-L-WDBHSC-ST-D12-M18X1,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M18 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 400 |
Pipe diameter (D1) | 12 mm |
Diameter 2 (D2) | 10 mm |
Diameter 3 (D3) | 25 mm |
Width across flats (S1) | 22 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 88 mm |
Length 2 (L2) | 72 mm |
Length 3 (L3) | 58 mm |
Length 4 (L4) | 50 mm |
Last viewed
Impact socket
Vionaro accessories set for inner bezel
Accessories for identification rings
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hammer drill bit Max Quadro-L Vario
Connector, pneumatic
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hammer drill bit Max Quadro-L Vario
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive