Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-40X4X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 40 x 4 x 6 mm |
Usable length of wire (H) | 9 mm |
Wire diameter | 0.20 mm |
Material of wire | Steel |
Surface | 0 - not applicable |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 18000 rpm |
Last viewed
EPS profile double cylinder
Fire protection duct I30/I60/I90/I120
Hammer drill bit Plus Duo-S Vario
Flexible electrical conduit WFKuS-EM-F-105-H0 ComfortXQ® With high-glide inner coating
Oil filter chain wrench, extra strong
Safety shoe S3
Low-cut safety shoes, S1
Lock washer DIN 6799, stainless steel 1.4568, collated
Fire protection duct wall connection collar I30/I60/I90/I120
Universal thinner For almost all solvent-based paint and primer materials