Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-STEEL-D60X13X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 60 x 13 x 6 mm |
Usable length of wire (H) | 14 mm |
Wire diameter | 0.30 mm |
Material of wire | Steel |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 15000 rpm |
Last viewed
Shelf For shelf trolley 1230 mm
E 6.3 TX bit (1/4 inch) E 6.3 (1/4 inch)
Hand cleaner N-Active
Hexagonal nut, 3xd high WN 6334 steel 10, zinc-plated blue passivated (A2K)
Cartridge Adjustable for wire stripping pliers
Assembly set For type RK II pipe collars
Locking system, DPS
Klebfix 4-in-1 superglue
ASSY® D
plug screw Countersunk head
Cut protection glove