Wide sanding belt

Name: Wide sanding belt
Brand: Würth
SKU: 0583215152

Wide sanding belt wood and veneer
SNDBL-WIDE-KPF-P150-930X1525MM
ZEBRA

Art.-no. 0583215152

EAN 4047376035751

All versions

Specification

F-paper base with aluminium oxide grain, half-open scattering, for extremely high loads (e.g. calibration). Can be used universally for all types of wood as well as for grinding melamine-coated boards.

Minimal clogging thanks to the anti-static equipment

Results in extremely long service life.

F-paper, half-open scattering with anti-static equipment

Extremely high load-bearing capacity of sanding belts (e.g. calibration)

Prevents the sanding belt from clogging up too soon

Optimum grinding finish

Low impact from grinding dust (fine dust)

Notice

The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows and not directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from the packaging in such a way that deformations are prevented.

Application

Application area

For wide-belt sanding machines

Calibration, sanding of cabinet fronts and side panels, sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.

Technical information

Width x length	930 mm x 1525 mm
Grid size	P150
Antistatic	Yes
Scattering	Half-open scattering
Backing material	F-weight paper
Material of abrasive medium	Aluminium oxide