Window construction screw, self-drilling, countersunk milling head, FEBOS® M
FEBOS M steel zinc plated counters. milling head H
SCR-DBIT-CS-CUTHD-H2-(A2K)-M4X25
FEBOS
Register now and access more than 125,000 products
- Metric thread
- Self-drilling window construction screw for use in UPVC window construction
- For connecting UPVC profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
- Greater load capacity threads with thin sheathing iron
The risk of forced advance with large distances between plastic and metal bracing is minimised by the flat, metric thread
If forced advance occurs, the drill tip may break away or the screw break during application.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 4 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Drill tip length (lp) | 5.2 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.4 mm |
Shape of tip | Drilling tip |
Other standard | WN 207 |
Declaration of performance (EU-CPR) | No |
Thread type | Metric thread |
Thread design | Full thread |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Filling system REFILLO®
Serrated lock washer, externally serrated, shape A DIN 6798, zinc-plated steel, blue passivated (A2K). Externally serrated
Bucket
ASSY® 3.0 zinc-plated blue chipboard screw
Protective glove, knitted with nubs
Workshop scheduler, two rows DIN A4
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
Drive arbor for HW hole saws (flat cut)
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B