Window construction screw, self-drilling, countersunk milling head, FEBOS®plus Steel, zinc-plated, blue passivated, PH drive
FEBOSplus steel zinc plated counters. mill. head H
SCR-DBIT-CS-CUTHD-SORT-H2-(A2K)-3,9X25
FEBOS PLUS
Register now and access more than 125,000 products
- Self-tapping screw thread
- Head diameter 7.5 mm
- Self-drilling window construction screw for use in plastic window construction
- For connecting plastic profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
Please also note the information on the overview page.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 3.05 mm |
Drill tip length (lp) | 6 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.2 mm |
Shape of tip | Drilling tip |
Other standard | WN 207 |
Declaration of performance (EU-CPR) | No |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Last viewed
Work trousers
Washer DIN 6340, steel, plain, for clamping device
Washer
Hexagonal bolt with thread up to head ISO 4017, steel 10.9, zinc-plated thick-film passivated (ZSML)
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Strip for quick-mount number plate holder Twin-Fixx, printed
Weld-in bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Ceiling bracket with three-wing flange EN1254, gunmetal, 4471G