Window construction screw, self-drilling, countersunk milling head, Febos®Plus PH drive
FEBOSplus steel zn ptd. cs mill. head H Deltacoll
SCR-DBIT-CS-CUTHD-SORT-H2-(DCO)-3,9X50
Register now and access more than 125,000 products
- Self-tapping screw thread
- Head diameter 7.0 mm
- Self-drilling window construction screw for use in plastic window construction
- For connecting plastic profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
Increased corrosion protection
In salt spray mist testing according to DIN EN ISO 9227-NSS, 240 hours without red rust on base metal corrosion.
Cr(VI)-free corrosion protection layer
Roller-sorted
- Sorted according to head diameter
- (Foreign parts > or < such as head diameter will be sorted out)
Datasheets(X)
- The machine setting must be matched to the screw.
- Factors to consider are:
- Plastic material and geometry
- Steel and steel grade
- Axial pressure
- Machine rotation speed
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 50 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 3 mm |
Drill tip length (lp) | 6 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.2 mm |
Shape of tip | Drilling tip |
Declaration of performance (EU-CPR) | No |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
SMART STEP EU+ HSCo twist drill bit DIN 338
Split pin ISO/WN 1234 steel zinc-plated
pias® drilling screw, round head with collar and AW drive
Spiral clamping pin, standard design ISO 8750 steel plain
Protective glove, chemicals
Slotted flat-head screws with small head DIN 920, steel 5.8, zinc-plated, blue passivated (A2K)
Sandpaper roll Useit® Superpad wood
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Cylindrical pin, hardened DIN 6325, steel, plain