Welcome to Würth Aerospace Solutions For trade customers only

Window frame screw AMO®-Y 11.5 mm

Amo-Y 11.5 steel zinc flake, silver, RW 30
SCR-(AMO-Y)-RW30-(DPS)-11,5X252
AMO III

Art.-no. 0234640252
EAN 4052703630424

Prices for customers after login
Window frame screw AMO®-Y 11.5 mm

Art.-no. 0234640252

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For window and door installation, the specialist in aerated concrete
  • With special coating and optimised thread geometry

  • Positive-locking, removable anchorage with no expansion pressure

  • Short installation times, as no setting tools are required

  • AW drive for longer bit service life, improved power transmission and no ejection forces

  • Removable

  • Steel, special coating, silver
Proof of Performance

General Building approval anchoring of windows in concrete and masonry



Component test using AMO-Y 11.5 mm frame screw to attach a glazed plastic door to a structure without lateral supports or spacers in PP 1.6–0.30 aerated concrete masonry. Test report no. 11-002642-PR01 dated 25 May 2012



Individual window installation situation: Plan, calculate and confirm using the ift assembly tool at www.montagetool.de

Notice

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Note the guidelines for planning and executing the installation of windows and house doors (art. no. 5995 000 000). To ensure the fall-proof mounting of windows in line with applicable guidelines and regulations, approved securing systems (e.g. window installation rail W-ABZ) must be used, or approval is required for each individual case.

Application area

General Building approval anchoring of windows in concrete and masonry



Component test using AMO-Y 11.5 mm frame screw to attach a glazed plastic door to a structure without lateral supports or spacers in PP 1.6–0.30 aerated concrete masonry. Test report no. 11-002642-PR01 dated 25 May 2012



Individual window installation situation: Plan, calculate and confirm using the ift assembly tool at www.montagetool.de

Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area

Fast and tension-free spaced mounting of window and door frames


  • Tension-free spaced installation for all frame materials for anchoring in aerated concrete

  • Specially for door and window fixing in aerated concrete

  • Installation of window and door frames with ∅ 10 mm pre-drilled mounting hole

Length (l)

252 mm

Thread diameter (d)

11.5 mm

Material

Steel

Surface

Flake zinc silver

Head type

Socket head

Head diameter (d(h/k))

11.3 mm

Internal drive

RW30

Drill-hole diameter in window frame (dWin)

10.2 mm

Thread type

Wood screw thread

Shape of tip

Tip

Raw density class
[kg/dm³]
Minimum compressive strength
[N/mm²]
Minimum screw-in depth
hnom ≥ [mm]
Min. edge spacing
cmin ≥ [mm]
Fzul [kN]1) for individual anchors under shear load, free screw length ef = 20mm2)

Performance data according to general construction permit


Further data can be found in the Permit Z-21.1-2097

Aerated concrete AAC (≥ 499x240x250)


DIN EN 4165; EN 771-4:2011
0,35≥21401000,50
0,35≥41401000,67
1) A partial safety value of YF = 1.5 was taken into account for wind
2) Values for deviating free screw lengths/joint widths can be found in permit Z-21.1-2097
General installation parameters
Nominal drill bit diameter Aerated concreted0 [mm] =10,00
Drilling surface diameterdcut ≤ [mm]10,45
Drill hole depthh1 ≥ [mm]150
Engagement lengthhnom ≥ [mm]140
Nominal drill bit diameter in window frame dWindow = [mm] 10,50
Drilling process Hammer drilling
Minimum edge distancecmin [mm]100
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Reference book

BOOK-WNDWINSTL-DIRECTIVE-CIRCULATION7

Guideline for the installation of windows and house doors
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information