Wing-tip drilling screw SC8 countersunk milling head
Steel black countersunk milling head SC8 TX
SCR-DBIT-WNG-CS-SC8-TX30-(SOS)-6,3X60
Register now and access more than 125,000 products
- Only install using application tools with a depth stop and claw coupling
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
- Wooden floors on steel substructures
- Suitable for installation on steel beams with a steel quality up to a yield strength of 460 MPa (tensile strength Rm 520-670 MPa)
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 60 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 12 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Special coating according to specifications |
Head type | Countersunk milling head |
Internal drive | TX30 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 8 mm |
Max. attachment thickness (lB) | 42 mm |
RoHS-compliant | Yes |
Last viewed
Round wire snap ring and snap ring groove for drill holes
Grating/net sanding strip
Combination pliers DIN ISO 5746
Cylindrical pin with female thread, unhardened DIN 7979, shape C, unhardened
Pneumatic wheel With steel rim for steel cylinder and drum trucks
Hexagon socket screw-in nut, tapered thread
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank DIN 931, steel 12.9, plain
Identification rings, PVC