Wing-tip drilling screw, countersunk milling head SCT7
Steel zinc flake silver cs milling head SCT7 TX
SCR-DBIT-WNG-CS-SCT7-TX40-(ZFSH)-8X85
Register now and access more than 125,000 products
Material
- Case-hardened carbon steel
Corrosion protection
- Zinc-flake coating
- Cr(6)-free
- Approx. 500 hrs. no base metal corrosion (salt spray test in accordance with DIN EN ISO 9227 - NSS)
Drill tip
- Fully hardened drill plate (function-related without corrosion protection layer)
Processing of hardwood and softwood by countersunk head with milling ribs
- Only install using application tools with a depth stop and claw coupling
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
- Wooden floors on steel substructures
- Especially for mounting on IPE steel beams (with parallel inner surfaces of the flanges)
- Steel quality of the substructure up to a yield strength of 460MPa (tensile strength Rm 520-670 MPa)
 | |
Nominal diameter (d) | 8 mm |
Length (l) | 85 mm |
Head diameter (dk) | 15 mm |
Drill tip length (lp) | 14.0 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Flake zinc silver |
Head type | Countersunk milling head |
Internal drive | TX40 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 7.0 mm |
Max. attachment thickness (lB) | 50 mm |
RoHS-compliant | Yes |
Last viewed
Wing nut, edged wing shape (American type) A2 stainless steel, plain
EPS profile thumbturn cylinder
Tungsten carbide bur Klingspor HF 100 C
Twist drill bit HSCo DIN 345 Type RN
Piston ring pliers With prism holders for secure retention of various piston ring types
Mounting plate for one-sided handle attachment
Fabric mounting tape For indoor and outdoor use
Hexagon head ripp locking screw with flange
HSCo Multi Performance thread former DIN 2174
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain