Wing-type drilling screw, countersunk milling head with AW drive SC8
Steel black countersunk milling head SC8 AW
SCR-DBIT-WNG-CS-SC8-AW30-(SOS)-6,3X60
Register now and access more than 125,000 products
Material
Case-hardened carbon steel
Surface
- Black
- Cr(6)-free
- approx. 500 hrs. no base metal corrosion (salt-spray mist test in accordance with DIN EN ISO 9227 - NSS
Processing of hardwood and softwood by countersunk head with milling ribs
Optimal power transmission and protection of corrosion protection by the AW drive
Only install using equipment with depth stop and claw coupling.
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
Wooden floors on steel substructures
Suitable for mounting on steel beams with a steel quality up to a yield strength of 460MPa (tensile strength Rm 520-670 MPa)
Floor attachment in commercial vehicle and platform construction
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 60 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 12 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Special coating according to specifications |
Head type | Countersunk milling head |
Internal drive | AW30 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 8 mm |
Max. attachment thickness (lB) | 42 mm |
RoHS-compliant | Yes |
Last viewed
O-ring, metric
Sealing ring, aluminium, shape A
Occupational shoes
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Round wire snap ring and snap ring groove for drill holes
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Cylindrical pin, inch
Order protector with rip-tape fastening
Quick-change mount for carbide cylinder saws
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)