Wing-type drilling screw, countersunk milling head with AW drive SCT7
Steel zinc plated countersunk milling head SCT7 AW
SCR-DBIT-WNG-CS-SCT7-AW30-(ZN)-6,3X60
Register now and access more than 125,000 products
Material
Case-hardened carbon steel
Corrosion protection
- Zinc-plated, blue passivated and sealed
- Cr(6)-free
- approx. 500 hrs. no base metal corrosion (salt-spray mist test in accordance with DIN EN ISO 9227 - NSS
Drill tip
Fully hardened drill plate (function-related without corrosion protection layer)
Processing of hardwood and softwood by countersunk head with milling ribs
Optimal power transmission and protection of corrosion protection by the AW drive
Only install using equipment with depth stop and claw coupling.
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
Wooden floors on steel substructures
Especially for mounting on IPE steel beams (with parallel inner surfaces of the flanges)
Steel quality of the substructure up to a yield strength of 460MPa (tensile strength Rm 520-670 MPa)
Floor attachment in commercial vehicle manufacture
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 60 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 12.0 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Zinc plated |
Internal drive | AW30 |
Min. recommended substructure thickness | 2.5 mm |
Max. material thickness to be drilled through (metal) (lU) | 6.0 mm |
Max. attachment thickness (lB) | 35 mm |
RoHS-compliant | Yes |
Last viewed
Cable tie tightening pliers Ergonomic
Grounding contact plug For cables up to 3G 2.5 mm²
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Identification rings, PVC
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Ducting clamp Part 3 – Double series
Checker plate box
3/8" socket wrench insert metric, hexagon, short
Wheel set 4 swivel castors dia. 100 mm
Safety boots, S3