Wing-type drilling screw, countersunk milling head with AW drive SCT7
Steel flake zinc silver cs milling head SCT7 AW
SCR-DBIT-WNG-CS-SCT7-AW40-(ZFSH)-8X70
Register now and access more than 125,000 products
Material
Case-hardened carbon steel
Corrosion protection
- Zinc flake coating
- Cr(6)-free
- approx. 500 hrs. no base metal corrosion (salt-spray mist test in accordance with DIN EN ISO 9227 - NSS
Drill tip
Fully hardened drill plate (function-related without corrosion protection layer)
Processing of hardwood and softwood by countersunk head with milling ribs
Optimal power transmission and protection of corrosion protection by the AW drive
Only install using equipment with depth stop and claw coupling.
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
CAD data (available after login)
Wooden floors on steel substructures
Especially for mounting on IPE steel beams (with parallel inner surfaces of the flanges)
Steel quality of the substructure up to a yield strength of 460MPa (tensile strength Rm 520-670 MPa)
Floor attachment in commercial vehicle manufacture
 | |
Nominal diameter (d) | 8 mm |
Length (l) | 70 mm |
Head diameter (dk) | 15 mm |
Drill tip length (lp) | 14.0 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Flake zinc silver |
Internal drive | AW40 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 7.0 mm |
Max. attachment thickness (lB) | 35 mm |
RoHS-compliant | Yes |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank
Paint spray Quattro
Dungarees
Rust remover Rost-Off
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
HSCo end mill, long, centre-cutting DIN 844L
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Paint radiator roller WB/LM/LA For solvent-based and water-based paints and varnishes