Wire cable barrel terminal With eye
Wire cable barrel terminal stainless steel A4 loop
AUG-ROLLTRML-A4-D10
Register now and access more than 125,000 products
- Pressed together with wire cables in order to produce a visually appealing cable end
- The B12 hydraulic press with appropriate crimping insert is suitable for this
These products have not been developed and manufactured as slings or load-bearing equipment.
Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC.
Datasheets(X)
CAD data (available after login)
 | |
Outer diameter (d1) | 18 mm |
Diameter of hole (d2) | 16.4 mm |
Eye diameter (d3) | 36 mm |
Effective length (l1) | 142 mm |
Length 2 (l2) | 90 mm |
Eye width (h1) | 12 mm |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Max. wire diameter | 10 mm |
Last viewed
Drilling screw, flat head with H cross recess pias®
Tipp® VDS loop hanger For fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Asbestos sheeting sack With skirting and fastener bands
Cetus trousers with holster pockets
Safety boots, S3
Slotted cylinder head screw ISO 1207, A4-70 stainless steel, plain
Round head screw with slot and nut W-0231, steel 4.8, zinc-plated with nut, slotted
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
EPS profile thumbturn cylinder
Clamping pin/clamping sleeve ISO 13337 spring steel plain