Wire cable barrel terminal with nut, left-hand thread
Wire cable barrel terminal A4 left-hand thread
BARLTRML-NUT-LEFT-A4-D10
Register now and access more than 125,000 products
Barrel terminals are pressed together with wire cables in order to produce a visually appealing cable end. A hydraulic press with adequate force application is suitable in this respect.
- These products have not been developed and manufactured as slings or load-bearing equipment.
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
Datasheets(X)
CAD data (available after login)
Gardening and landscaping, ship building and railing construction.
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (d1) | M20 |
Outer diameter of wire-cable side (d2) | 18 mm |
Length (l1) | 230 mm |
Thread length (metric thread) (l2) | 119 mm |
Length of wire-cable sleeve (l3) | 90 mm |
Suitable for rope diameter | 10 mm |
Other standard | WN 5176-052 |
Product weight (per item) | 370 g |
Thread type | Metric thread |
Type description | Wire cable barrel terminal |
Last viewed
Façade roller DW For dispersions and wall paints
Hexagon weld nuts DIN 929, steel, plain
3/4" cardan joint
Check valve Euro Universal
ECO flat hose for abrasion and scuff protection
Saddle washer for trapezoidal profile
Countersunk head screw
Safety boots, S2
Safety sandals, S1P
Heavy Duty floor marking, L-piece