Wire cable barrel terminal with nut, left-hand thread
Wire cable barrel terminal A4 left-hand thread
BARLTRML-NUT-LEFT-A4-D2,5
Register now and access more than 125,000 products
Barrel terminals are pressed together with wire cables in order to produce a visually appealing cable end. A hydraulic press with adequate force application is suitable in this respect.
- These products have not been developed and manufactured as slings or load-bearing equipment.
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
Gardening and landscaping, ship building and railing construction.
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (d1) | M5 |
Outer diameter of wire-cable side (d2) | 5.5 mm |
Length (l1) | 86 mm |
Thread length (metric thread) (l2) | 40 mm |
Length of wire-cable sleeve (l3) | 32 mm |
Suitable for rope diameter | 2.5 mm |
Other standard | WN 5176-052 |
Product weight (per item) | 13.300 g |
Thread type | Metric thread |
Type description | Wire cable barrel terminal |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Low-cut safety shoes, S1P
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Safety shoe S1
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Hexagonal bolt with shank and fine thread
Connector, pneumatic
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Hexagonal bolt with shank and fine thread
Safety boots, S3
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles
